3/8"LP (Small 3/8) Chainsaw Chain
3/8"LP Right Angle Chainsaw Chain
Pitch: | mm | 6.35 |
in | 0.25 | |
Carry the thickness of the chain piece: |
mm | 1.1 |
in | 0.043 | |
code | 43 |
Pitch: | mm | 6.35 |
in | 0.25 | |
Carry the thickness of the chain piece: |
mm | 1.1 |
in | 0.043 | |
code | 43 |
Founded in 2010, one of the manufacturers in the chain saw industry which leaped into high-quality and automatic production.
Over the past 10 years, as a professional wholesale 3/8"LP Right Angle Chainsaw Chains suppliers, we have accumulated customers in 53 countries and regions. We use sophisticated techniques with a high quality-control level to make us eligible to provide OEM services for more than 117 mid-to-high-end chain saws brands abroad.
Construction Area
Employment
Daily production chain
Dec
1. The wear resistance advantage of chrome-plated bladesThe .404 O Half Square Tooth Chainsaw Chain ...
Read MoreDec
1. Definition and characteristics of microalloy steelMicroalloyed steel is a special steel with trac...
Read MoreDec
1. Design principle of grinding angle lineOn the top of the blade of .404' S Style Half Square Tooth...
Read MoreNov
1. Basic principles of precise hardening of rivetsRivets are an important part of the chain that con...
Read MoreNov
1. Basic principles of hardened chromium coatingChromium coating is a technology commonly used for m...
Read MoreInstalling a 3/8"LP right angle chainsaw chain is first of all a feast of preparation. Make sure you have the necessary tools such as screwdrivers, wrenches, chain adjusters, etc. on hand, just like a soldier ready to go. At the same time, carefully read the instruction manual of the chain saw and chain saw chain, just like studying the terrain before the battle, and understand the tactical layout of each step. It is especially important to disconnect the power supply or battery of the chain saw to ensure that no accidents will occur during the installation process. This is the first prerequisite for safe operation.
Next, it is the meticulous step of removing the old chain (if it has been installed). Use a screwdriver or wrench to gently remove the cover or chain on the chain saw Fixing the device is like an archaeologist carefully uncovering the dust of history. Then, slowly remove the old chain from the chainsaw, and be careful with every step to avoid damaging the chainsaw or causing injury.
Installing a new chain is the most critical part of the whole process. First, determine the installation direction of the chain according to the instructions or the markings on the chainsaw chain, and make sure that the sharp barb is facing the drive direction of the chainsaw. This is the key to ensuring cutting efficiency and safety. Next, align the slot of the new chain precisely with the slot of the guide bar on the chainsaw, just like a craftsman carving a work of art. Then, pass one end of the chain through the guide bar on the chainsaw. The chain is fixed to the axis or fixed point of the chain and firmly fixed in the corresponding position to ensure that the chain will not loosen or fall off during operation. Finally, reinstall the cover plate or chain fixing device of the chain saw to the chain saw and tighten the screws with a screwdriver or wrench, just like adding the final seal to the artwork.
Adjusting the tightness of the chain is an important step to ensure the stable performance of the chain saw. Use a chain adjuster or corresponding adjustment device to adjust the chain to the appropriate tension according to the instructions in the manual. It is neither too tight to cause poor operation nor too loose to cause weak cutting. This is the secret of efficient operation of the chain saw.
After the installation is completed, don't forget to lubricate the chain. The right amount of lubricant is like a protective coat for the chain saw chain, reducing friction and wear and extending its service life.
During the entire installation process, the professional background of Zhejiang Best Friend Tools Co., Ltd. is like an invisible mentor, providing us with solid support and guarantee. As a leader in the industry, Zhejiang Best Friend Tools Co., Ltd. always puts product quality first. The 3/8"LP right angle chainsaw chain it produces is made of high-quality materials, and is precision-processed and strictly inspected to ensure that each product can meet high standards of quality. At the same time, the company has a professional technical team and a complete after-sales service system, which can provide users with comprehensive technical support and solutions. Whether it is the problem of purchase, installation or use, it can be handled in a timely and professional manner.
Therefore, when we work with Zhejiang Best Friend Tools Co., Ltd. to accurately install the 3/8"LP right angle chainsaw chain, we are not only installing a tool, but also installing a trust and guarantee. In the future use process, this trust and guarantee will accompany us, bringing more convenience and benefits to forestry, gardening and DIY projects.